How do you reset the pilot light on a electric water heater?

Do electric water heaters have a reset?

Somewhere on your electric water heater, you’ll find a reset button. It’s usually red and often located near the thermostat. It may also be hidden behind a removable metal panel on the unit—and then behind some insulation. … If your water heater now has power, you’re all set.

Do electric water heaters have a pilot light?

There’s no gas or pilot light involved in electric water heaters. If the power to your electric water heater is off, you may have an electrical issue requiring professional assistance. … You will need to reignite a gas water heater that does not light automatically.

How do I light the pilot on my electric water heater?

Lighting the Pilot Light on an Automatic Hot Water Heater

All you have to do is hold the pilot knob down for 30 seconds and hold the ignition button at the same time. You do not need to use a lighter. Your pilot light will turn on!

Why is my electric water heater not getting hot?

If an electric water heater is not producing hot water, it could be a simple problem like a blown fuse or tripped circuit breaker. Additionally, some electric water heaters have a circuit-style safety switch located near or on the thermostat.

IMPORTANT:  Can graphene conduct electricity?

What causes an electric hot water heater to stop working?

When there’s no hot water, the problem can stem from lack of power, a faulty electric thermostat or a faulty upper electric heating element. … When the water’s not hot enough, the problem can be an undersized water heater, crossed hot and cold connections, or a faulty heating element or thermostat.

How do you reignite a pilot light?

Relight the pilot light.

Turn the knob to “Pilot,” and let gas to flow to the pilot. Light a lighter or match, then push in the reset button. Hold your flame to the pilot light’s opening. Keep the reset switch depressed until the pilot light is burning steadily.

How do you reset the pilot light?

How Can I Restart My Pilot Light?

  1. Step 1: Turn off your furnace. …
  2. Step 2: Locate your gas valve. …
  3. Step 3: Hold down the red button. …
  4. Step 4: Light the pilot light. …
  5. Step 5: Let go of the button. …
  6. Step 6: Turn your gas back on. …
  7. Step 7: Turn your furnace back on.

How do you reignite a pilot?

Turn the knob to “Pilot” and hold down the “Reset” button.

Using a long lighter, bring the flame close to the pilot opening. This should ignite the pilot light. Once the pilot is lit, you can release the reset button.

Why do water heaters still have pilot lights?

* Caution: Most modern water heaters no longer use standing pilots. They use electronic ignition to ignite the gas. Do not attempt to manually light an electronic ignition system. … If the pilot light will not re-light, the problem could be a clogged pilot line or orifice, or gas is not reaching the water heater.

IMPORTANT:  How does electricity travel through the ocean?

Why did my pilot light go out water heater?

Some of the most common reasons that water heater pilot lights go out include: A faulty thermocouple. … Over time, thermocouples can begin to malfunction and shut off the gas supply to the pilot light even if it’s burning properly. A bent or dirty thermocouple.