How do I read my electric meter?

When reading an electric meter, read and write down the numbers as shown on the dials from right to left. When the pointer is directly on a number, look at the dial to the right. If it has passed zero, use the next higher number. If it has not passed zero, use the lower number.

How do I read my digital electric meter?

A digital metric meter will have an electronic or digital display, showing 5 numbers then a decimal point, followed by some more numbers. To read the meter: Write down the first 5 numbers shown from left to right. Ignore the numbers after the decimal point, sometimes shown in red.

How do you read a smart meter with A and B button?

If your meter has A and B buttons under the screen

  1. press the A button.
  2. press the A button again until you see ‘METER INDEX’ and numbers followed by ‘M3’
  3. write down the number from left to right.
  4. ignore any zeroes at the beginning and any numbers after the decimal point.

Which button is read on electric meter?

To read the meter: press the middle button – it should say ‘R1’ write down the number below ‘IMP’ from left to right – this is usually your night or ‘off-peak’ reading. press the middle button again – it should say ‘R2’

IMPORTANT:  Are there any rare materials in solar panels?

How do you read a meter on a smart meter?

To get a reading from these smart meters:

  1. Press 9 on the keypad.
  2. A series of letters will appear: IMP KWH.
  3. Then you’ll see 8 digits (e.g. 0012565.3) followed by kWh at the bottom right of the screen.
  4. This is your read, so in this case your reading would be 12565.

What do the numbers mean on a smart meter?

There are three displays on your smart meter. The first lets you know if your electric service is on. … The second shows you how much electricity in kilowatt-hours (kWh) you have used for the current billing term. That’s also called your cumulative usage. The third number shows your electricity demand reading.

Can you manually read a smart meter?

How to manually read a smart meter. … You can read your smart meter by taking a look at your in-house smart meter display unit. This display will show you your daily, weekly or monthly energy use in terms of money, kilowatt hours and carbon emissions.

Which smart meter do I have?

The easiest way to tell is to look at your electricity meter. If the serial number starts with 19P, this indicates it’s a SMETS1 meter. If it starts with 19M, then this means it’s SMETS2.

How do you read 4 dials on an electric meter?

To determine your correct meter reading, simply read the dials in order from right to left. As you read each dial, write down the number. In most cases, the pointer will be between two numbers on the dial. THE CORRECT NUMBER IS THE LOWER OF THE TWO, EXCEPT WHEN BETWEEN THE 0 AND 9, IN THAT CASE YOU WOULD READ THE 9.

IMPORTANT:  Quick Answer: Are Sunbeam electric blankets washable?