Use a vacuum to clean out dirt, debris and dust from the inside of the furnace. Vacuum especially around the blower wheel and compartment. You can use a stiff toothbrush to scrub the dust off of the blower wheel while vacuuming. Take care not to damage any wires while vacuuming inside the furnace.
Do electric furnaces need cleaning?
The furnace should be cleaned and adjusted by a certified dealer or qualified service contractor once a year or before the start of every heating season. The following items must be cleaned and serviced or replaced if there are signs of deterioration.
Can I clean my furnace myself?
If your furnace has ducts or vents, you can also clean these of dirt and dust by using a vacuum. If your furnace does not seem to be functioning properly even after you clean the filter, blower, and heat exchange, contact a professional for an inspection, cleaning, and possible repairs.
How often should an electric furnace be cleaned?
A professional can also deep clean the system and get all of the dust and dirt out of the system in a lot less time. If necessary, ductwork can also be cleaned by a professional. We also recommend that you have your furnace cleaned and serviced at least once a year.
What maintenance is needed for an electric furnace?
Lubricating and cleaning the motor are important parts of maintenance. Checking the heating elements—the parts of the furnace that heat up with electric current in order to transfer heat to the air—is also a key part of maintaining the furnace.
How do you clean an electric furnace heating element?
Once you have your equipment together, follow these six steps to clean your electric furnace:
- Turn the electricity to the furnace off. …
- Replace the filter. …
- Vacuum the inside of the furnace. …
- Inspect the wires and belts. …
- Clean all heat registers. …
- Clean up and turn the power on. …
- Turn off the power and gas to the furnace.
Do electric furnaces have a filter?
Like any furnace, electric furnaces have filters. Filters are a vital part of a furnace’s performance. The filter can usually be found within the blower compartment of the electric furnace. Even electric furnaces require filters and maintenance so that they can run well and provide you with warmth all winter long.
How do I clean my furnace ducts myself?
DIY Air Duct Cleaning Steps
- Remove vent covers and wash them. Remove your vent covers with your screwdriver. …
- Cover vent openings with paper towels. Cover the openings to your supply registers with a few paper towels. …
- Loosen the dust. …
- Vacuum it up. …
- Change your air filter. …
- Replace vent covers.
How long does it take to clean a furnace?
On average, a furnace cleaning will take 1.5 to 2 hours to professionally clean. But depending on the condition of the furnace, the size of the home extra time may be required to clean your furnace fully. A furnace cleaning and tune-ups includes: Inspect and clean heat exchanger for cracks or blocking.
What does a furnace cleaning consist of?
Inspecting the vent system and air intake grilles, removing any blockages. Checking the heat exchanger for signs of damage or corrosion. Examining and cleaning the blower, removing any debris. Checking the blower motor and testing its amp draw.
How do I maintain my furnace myself?
7 Tips for Maintaining Your Furnace
- Clean or replace your filter. …
- Make sure blower motor is functioning correctly. …
- Reduce home’s heating load. …
- Make sure all household vents are free. …
- For gas furnaces, verify the exhaust flue to the outside is clear. …
- Remove all flammable objects from around your furnace.
How long do electric furnace elements last?
With appropriate and consistent maintenance, you can expect your electric furnace to last between 20 and 30 years.
How long do electric forced air furnaces last?
A gas furnace on average lasts between 15 and 20 years. An electric furnace lasts between 20 and 30 years.