If everything is working properly, the air coming out of your furnace will be about 40° – 70° warmer than the air coming in; this increase is called the temp rise. If the temp rise is too high, it could be caused by an oversized furnace, undersized ductwork, a combustion problem, or an airflow obstruction.
How hot should electric furnace air be?
Measured at the furnace the supply air temperature typically ranges 40-70 °F above the return air temperature. A furnace data tag will usually give a maximum outlet air temperture (typically around 170°F) as well as a temperature rise (typically 40-70°F).
Why is my electric furnace blowing lukewarm air?
When airflow through your vents are blocked, the burner of your furnace will shut off, while the blowers continue to run as normal. Over a short period, the fan will turn the air cold or lukewarm at best. Air filters keep the air in your home clean and easy to breathe.
What temperature should the heat be coming out of the vent?
Heat pumps usually produce air that is 85-92°F. This is plenty warm to heat your home to your desired 72°F. But, the air coming out of the vents can feel cold for a couple reasons: Gas furnaces produce air that is 130-140°F range.
How hot is the air from a furnace?
The Heating Process
When the combustion occurs and air is first heated, the temperature is between 140 degrees F and 170 degrees F. This is extremely warm and could be dangerous to anyone if they got too close to it or it was blown directly into your home.
Why is my furnace not blowing out hot air?
First, check to make sure the thermostat is set correctly. You will want to make sure that the fan control is set to auto, and not ‘on’. If the thermostat appears set correctly, turn off your heater at the thermostat and check the filter. If the filter is dirty, replace it.
How do you reset electric furnace?
How to Reset an Electric Furnace
- First, turn off the power supply to the furnace by turning off the breaker in the circuit box.
- Locate the reset button on the furnace and press it to reset the furnace. …
- If the button is popped up, press it down.
- Return the cover to the blower compartment and turn the power on.
How long does it take for an electric furnace to heat up?
In general, your furnace will take about an hour to warm up your home by a few degrees. Although this depends on a home’s size and the furnace’s age, you should expect the temperature to feel slightly warmer after about 30-45 minutes.
How much air should be blowing out of the vents?
The air coming out of your vents should be roughly equal throughout your whole house. A bathroom fan, for example, should be able to pump a minimum of 50 cubic feet of air per minute.
Why is the heat in my house blowing cold air?
A clogged filter is one of the leading reasons for a heater blowing cold air. But even if you swap the air filter with a brand new one, dirt and debris can still be found within the unit. This could eventually lead to overheating. If your furnace looks pretty dirty, call an HVAC provider for a professional clean.
Why is cold air coming out of my vents when the heat is on?
Your Air Filter Is Dirty
Clogged air filters could be causing cold air to blow out of your vents. A dirty air filter can block airflow over your furnace’s heat exchanger, which can cause it to overheat.
What should air temp be at register?
If the AC system is operating correctly, then the air coming out of your vent should be about twenty degrees cooler than the regular temperature inside. So, if you’re cooling it and the house is 80 degrees, then you would ideally want the air to be about 60 degrees.
Should furnace be hot to touch?
Most single stage furnaces should be just uncomfortable to touch on the main trunk just above the main unit. As Heat rise levels can range from 50-70 higher than ambient air temp. Yes, it’s normal.